article·2004-06-25

Effect of substrate on phase transformation kinetics of WSix films

S. Bharat, Pratap K. Sahoo, Monica Katiyar

Publisher page

Abstract

Abstract WSi x films deposited by chemical vapor deposition are amorphous in nature and need to be annealed at high temperature to obtain the low resistivity required for the interconnection and metallization layer in VLSI circuits. In this paper, we focus on the annealing of WSi x films. WSi 2.4 films on Si and SiO 2 substrates were annealed at 1000 °C for times ranging from 5 to 60 min. The as-deposited and annealed films were analyzed by Rutherford back-scattering spectroscopic analysis (RBS), X-ray diffraction, and four-point probe method. In our samples, we observe differences in the annealing behaviour of the films on two substrates as a function of annealing time. On Si substrate, WSi 2.4 film's Si/W ratio and thickness decreased with annealing time, in contrast, there was only a small change in composition and thickness for films on SiO 2 substrate. There was evidence that excess Si from WSi 2.4 film segregated on the top of the silicide layer and also at the WSi x /Si interface. On the Si substrate, the integrated X-ray intensity continues to increase beyond the first 15 min of anneal. On SiO 2 , the integrated X-ray intensity saturates beyond the first 15 min of anneal. The combined effect of compositional and structural changes is in agreement with the sheet resistance trends on two substrates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Semiconductor materials and devices · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.