High rate deposition of TiO2 and SiO2 films by radical beam assisted deposition (RBAD)
Source abstract
Abstract
Abstract Radical beam assisted deposition (RBAD) is an advanced and attractive technique compared with the conventional vacuum evaporation process. In this study, TiO 2 and SiO 2 films were deposited from Ti and Si metals onto glass substrate by RBAD. Atomic oxygen radicals were produced by a beam source using a RF plasma tube. The atomic oxygen radical beam flux (AORBF) density could be achieved to be more than 1×10 15 (atom cm −2 s −1 ). The refractive indices n of the TiO 2 films were higher than 2.35, and the extinction coefficients k were lower than 3×10 −3 at the deposition rate of 1.8 nm s −1 when the AORBF density was 8.4×10 15 (atom cm −2 s −1 ). For the SiO 2 film, n was 1.48, and k was lower than 1.5×10 −3 at the deposition rate of 2.4 nm s −1 . Moreover, n of the TiO 2 films could be increased to 2.50 by adding an ion beam flux to the radical beam flux. From these results, it is confirmed that TiO 2 and SiO 2 films deposited by RBAD have good optical properties even at higher deposition rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ion-surface interactions and analysis · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.