The effects of growth temperature on the microstructure and electrical barrier height in PtSi/p-Si(100) Schottky barrier detector
Source abstract
Abstract
The effects of growth temperature on the microstructure and electrical barrier height of the PtSi Schottky barrier detector (SBD) have been investigated. PtSi films, 4 nm in thickness were deposited at various temperatures ranging from 350 to 550°C. The electron diffraction patterns showed that PtSi film formed at 350°C depicts an intermingling of both (110) and (121) orientations. However, only (121) orientation was shown when the PtSi films were formed above 450°C. Moreover, SBD formed at 350°C was found to depict an electrical barrier that is approximately 0.02 eV higher than those formed above 450°C. Although the microstructure and the electrical barrier height of the PtSi film do not change when the formation temperature was further increased from 450 to 550°C. Nevertheless, the higher formation temperature resulted in a larger grain size, indicating that grain size alone does not affect the barrier height of the resultant SBD.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.