Post-etch residue removal in BCB/Cu interconnection structure
Source abstract
Abstract
Abstract This article describes the evaluation of post-etch residue removal after descumming BCB (Benzocyclobutene). BCB is widely used in the electronics industry due to its low tangent loss at the high frequency (tan d =10 −3 at 10 GHz). The BCB film is descummed by brief exposure to plasma after curing. The descumming process is necessary to remove the residue that remains after the developing process. O 2 /CF 4 , in which the ratio of O 2 to CF 4 is 80:20, has been used as etching gas. It is critical to have the low contact resistance between BCB and Cu in the BCB/Cu interconnecting structure. We have tried a few chemicals to make the surface clean for the low contact resistance and found that the EKC chemical is very effective to clean via surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.