Substrate geometry effect on the uniformity of amorphous carbon films deposited by unbalanced magnetron sputtering
Source abstract
Abstract
Abstract A chromium doped amorphous carbon (a-C) film was deposited by an unbalanced magnetron sputtering. A special designed double-V shaped stainless steel model in simulating a plastic injection mold gateway was used as the substrate to investigate the geometric effect on the uniformity of the film. It was found that, on both the side wall and bottom plane of the double-V shaped substrate, the film properties strongly depended on a geometric parameter, geometric aspect ratio, defined as the depth over width of the simulated gateway at the points under measurement. With the increase of the aspect ratio, i.e. approaching to the narrow end and/or closer to the bottom plane of the gateway, the film thickness and hardness decreased and the intensity ratio of the Raman sub-bands D over G increased. With the increase of the aspect ratio, the micro hardness of the a-C film decreased far more significantly on the side wall than that on the bottom plane. With increasing working gas pressure, the film thickness decreased consistently, and the hardness uniformity on both the side wall and bottom plane was improved. When the substrate negative bias voltage was changed from −70 to −100 V, the film uniformity (for both the thickness and hardness) was improved on the bottom plane, but degraded on the side wall.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.