article·2000-01-01

Plasma deposition of amorphous carbon films on copper

Sung Mao Chiu, Stéphane Turgeon, B. Terreaul, A. Sarkissian

Publisher page

Abstract

Abstract The plasma source ion implantation (PSII) technique was used in an attempt to promote diamond formation on a copper substrate via the so-called carbon-implantation-out-diffusion (CIOD) method. Carbon films were deposited on copper substrates in DC and pulsed plasma modes at temperatures and substrate bias voltages (BV) ranging from room temperature (RT) to 950°C and 0 to −30 kV, respectively. All carbon films deposited in the DC-plasma mode at 800–950°C with a BV up to 10 kV exhibited G-band and D-band Raman shifts typical of polycrystalline graphite. Very similar Raman spectra were also obtained from carbon films deposited in the pulsed plasma mode at 800–950°C and a BV up to −30 kV. The Raman spectral shape of the carbon film deposited at RT and −300 V in the pulsed plasma mode showed an asymmetric broad single peak typical of an amorphous diamond-like carbon film with G-band peak shifted toward the lower frequency end at 1520 cm −1 from the original graphite G-line position at 1580 cm −1 . No trace of crystalline diamond, signatured by a distinct sharp peak at 1332 cm −1 , was found under the experimental conditions examined. Results from XPS analyses were consistent with those of the Raman studies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Ion-surface interactions and analysis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.