Nano-structural characteristics of Ti/glass and Ti/Mo films as a function of deposition rate and angle of incidence
Source abstract
Abstract
Abstract Titanium films of 90 nm thickness were deposited under UHV condition at different deposition rates, ranging from 0.3 to 10.2 A s− 1, at room temperature on glass and Mo substrates at two incidence angles of 8.5° and 45°. The samples were analyzed using XRD and AFM techniques. The grain sizes were obtained from AFM images, while the crystallite sizes and preferred orientation of the films were obtained from XRD profiles. Results show that Ti/glass films at 8.5° angle of incidence show (002) preferred orientation, while at 45° incidence angle, at lower deposition rates, films show an almost amorphous structure, which develops to a strong (002) preferred orientation for deposition rate of 1.6 A s− 1, and again at much higher deposition rate of 10.2 A s− 1 it changes to an amorphous structure. Ti/Mo films deposited at 45° incidence angle showed (101) preferred orientation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.