article·2003-11-06

Amorphous carbon nitride thin films as electron injection layer in organic LEDs

M. Cremona, R. Reyes, Carlos A. Achete, R. Távora Britto, S.S. Camargo

Publisher page

Abstract

Abstract Thin films of a-C:N and a-SiC:N deposited by diode r.f. sputtering and magnetron sputtering, respectively, were used as electron injection layers in organic light emitting diodes. The devices consist of two different heterojunction structures: the first one, indium tin oxide (ITO)/hole transport layer (HTL)/electron transport layer (ETL)/a-C:N/Al and the other one formed by ITO/HTL/ETL/a-SiC:N/Al. The HTL was obtained using a thin film of 1-(3-methylphenyl)-1,2,3,4 tetrahydroquinoline-6-carboxyaldehyde-1,1′-diphenylhydrazone (MTCD), while the tris(8-hydroxyquinoline aluminum) (Alq3) is used as ETL. For all produced devices a significant increase in the current compared to the conventional ITO/MTCD/Alq3/Al structure was observed. Light emission was detected in both ITO/MTCD/Alq3/a-C:N/Al and ITO/MTCD/Alq3/a-SiC:N/Al structures. The results are interpreted in terms of a highly efficient electron injection from the carbon nitride layer into the electron transporting one. The electroluminescent spectra of the devices are also reported and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.