Application of plasma immersion ion implantation on seeding copper electroplating for multilevel interconnection
Source abstract
Abstract
Abstract In this study, an effective seeding technology, plasma immersion ion implantation of palladium (PIII Pd), was proposed to achieve defect-free gap filling for copper electroplating (Cu-ECP). It was found that a threshold dosage (∼5.2×10 18 m −2 ) of PIII Pd was required to drive Cu-ECP and the dependence of Pd dosage on the implantation time was quasi-linear. The thickness of electroplated copper films increased as the Pd dosage increased. Too high a Pd dosage caused a rough copper film with high resistivity (>10 μΩ cm) while too low a Pd dosage resulted in an insufficient nucleation site for Cu-ECP, leading to poor film adhesion. In addition, a higher substrate bias of PIII was suggested to enhance the gap-filling capability of Cu-ECP and the Cu(111) formation of electroplated copper films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Electrodeposition and Electroless Coatings · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.