High-rate deposition of SiNx films over 100 nm/min by Cat-CVD method at low temperatures below 80 °C
Source abstract
Abstract
SiN x films without absorption in visible range were prepared using a gaseous mixture of SiH 4 , NH 3 and H 2 with a deposition rate of 110 nm/min, keeping the substrate temperatures below 80 °C. These high-rate SiN x films were subjected to pressure cooker test (PCT) at 121 °C, 100% relative humidity (RH), 2 atm for 24 h. No oxidation for SiN x films was observed even after PCT. Film stress was measured by surface profilometry. Stress for these high-rate SiN x film is below 40 MPa. From these results, it is concluded that highly moisture resistive, low stress and transparent SiN x films can be prepared by Cat-CVD with deposition rates faster than 100 nm/min, which appears to satisfy industrial requirements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.