article·2003-04-30

Nano- and micro-tribological characteristics of amorphous carbon films prepared by shielded arc ion plating

Kyung-Hwang Lee, Hiroyuki Sugimura, Yasushi Inoue, Osamu Takai

Publisher page

Abstract

Abstract Amorphous carbon (a-C) thin films have been prepared by shielded arc ion plating (SAIP) at an argon gas pressure of 1 Pa by applying a substrate bias voltage between 0 and ∼−500 V. The chemical structure of the a-C thin films was studied by visible Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). The nanohardness and wear resistance of the films were measured with a nanoindenter interfaced with an atomic force microscope (AFM). The friction coefficient of the films was determined with a SUJ2 bearing ball using a ball-on-disc tribo-tester. The maximum nanohardness of 42 GPa was obtained when the film was prepared at a negative substrate bias (Vb) of −100 V. This film also showed the highest wear resistance and lowest friction coefficient, although the bearing ball was highly worn down. The nanohardness and wear resistance decreased between −200 and −500 V. The Raman spectroscopy and XPS results showed that the sp3 fraction increased by applying suitable Vb of −100 V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.