article·2007-02-22Open access

Epitaxial growth of Fe3Si/CaF2/Fe3Si magnetic tunnel junction structures on CaF2/Si(111) by molecular beam epitaxy

Kenichi Kobayashi, Takashi Suemasu, Noriyuki Kuwano, Daisuke Hara, Hiroyuki Akinaga

Abstract

Abstract The Fe 3 Si(24 nm)/CaF 2 (2 nm)/Fe 3 Si(12 nm) magnetic tunnel junction (MTJ) structures were grown epitaxially on CaF 2 /Si(111) by molecular beam epitaxy (MBE). The 12-nm-thick Fe 3 Si underlayer was grown epitaxially on CaF 2/ Si(111) at approximately 400 °C; however, the surface of the Fe 3 Si film was very rough, and thus a lot of pinholes are considered to exist in the 2-nm-thick CaF 2 barrier layer. The average roughness (Ra) of the CaF 2 barrier layer was 7.8 nm. This problem was overcome by low-temperature deposition of Fe and Si at 80 °C on CaF 2 /Si(111), followed by annealing at 250 °C for 30 min to form the Fe 3 Si layer. The Ra roughness was significantly reduced down to approximately 0.26 nm. A hysteresis loop with coercive field H c of approximately 25 Oe was obtained in the magnetic field dependence of Kerr rotation at room temperature (RT).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic properties of thin films · ZnO doping and properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.