Infrared reflectance of direct current magnetron sputter deposited films of Ni93V7, Cu89Ni10Fe1(Mn) and Cu
Source abstract
Abstract
Abstract Direct current magnetron sputter deposition of thin metal films from nickel- and copper-based alloys have been used to prepare infrared reflectors in spectrally selective solar absorbers. The sputtering process was optimized regarding sputter rate, argon pressure and base pressure in order to achieve maximum infrared reflectance for each target material. The structural properties of the films were investigated by scanning electron microscopy and X-ray diffraction. It was found that the near normal thermal emittance at a surface temperature of approximately 100 °C can be reduced from 0.12 to 0.06 if nickel–chromium, which is commonly used as infrared reflector in tandem solar absorbers, is substituted by copper–nickel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.