article·2000-09-01

Electrical conductive hard-carbon (diamond-like carbon) films formed by i-C4H10/N2 supermagnetron plasma chemical vapor deposition method

Haruhisa Kinoshita, Jun Takahashi, Takuya Hando

Publisher page

Abstract

Abstract Electrical conductive hard-carbon (diamond-like carbon, DLC) films were formed using a supermagnetron plasma chemical vapor deposition (CVD) method. Using a mixture of i -C 4 H 10 and N 2 gases, DLC films were deposited on thermally oxidized Si wafers, and the film deposition rate, hardness, and resistivity were measured. Two rf powers of the same frequency (13.56 MHz) with a rf phase difference of 180° were supplied to each electrode. The lowest resistivity of 1.7×10 3 Ωcm was observed at a N 2 concentration of 70%, at a gas pressure of 50 mtorr, an electrode temperature of 80°C, and at rf powers of 900 W/900 W. In this case, measured film deposition rate and hardness were 2300 A/min and 1700 kg/mm 2 , respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.