Carbon effect on the phase structure and the hardness of RF sputtered zirconia films
Source abstract
Abstract
Abstract Thin films of zirconia–carbon (ZrO2−x–C) were deposited by RF magnetron sputtering, on both polycarbonate and cemented-WC substrates. Two separate targets of monoclinic ZrO2 and graphite were used and a composition range was selected from 0 to ∼30 at.% carbon. The C-containing films resulted in a composite structure, which consisted of a zirconia phase coexisting with an amorphous carbon phase. A tetragonal zirconia phase was found in films containing 10–30 at.% carbon, while films of pure zirconia grew in the monoclinic phase. The tetragonal phase of zirconia coincided with the presence of compressive internal stresses in the films, which increased with increasing C content. As a consequence of the microstructure induced by the presence of carbon, the ZrO2−x–C films resulted in a stronger surface hardening of the polymeric substrates than the pure zirconia films did.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.