article·2001-06-01

Study of pulsed laser deposited lead lanthanum titanate thin films

Putcha Venkateswarlu, S. S. N. Bharadwaja, S. B. Krupanidhi

Publisher page

Abstract

Abstract Paraelectric lanthanum doped lead titanate (PLT) thin films for high permittivity material applications were grown on Pt-coated Si-substrates by the laser ablation technique. A rapid thermal annealing (RTA) process was adopted to induce crystallization and a polycrystalline fine microstructure was obtained. The dielectric properties, capacitance–voltage (C–V) characteristics and polarization hysteresis (P–E) with temperature were studied. The dielectric constant was approximately 720 while the dissipation factor was approximately 0.04 at room temperature for a 0.9-μm thick film at 100 kHz frequency. Hysteresis behavior was observed in C–V and P–E responses and was attributed to the presence of charge accumulation either in the grain boundaries or in the electrode–film interface. The charge storage density aspect was studied for DRAM applications and the obtained charge storage density at 6 V was 4.5 μC/cm2. The density of surface charge states was approximately 1013 cm2/eV at room temperature and the effect of temperature and frequency was studied and correlated with the properties of the film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.