Effects of hydrogen plasma pretreatment on characteristics of copper film deposited by remote plasma CVD using (hfac)Cu(TMVS)
Source abstract
Abstract
Abstract The effects of remote hydrogen plasma pretreatment on the characteristics of copper films prepared by remote plasma chemical vapor deposition (RPCVD) using copper(I) hexafluoroacetylacetonate trimethylvinylsilane [Cu(hfac)(TMVS)] were studied at a pressure of 1 torr, substrate temperature of 200°C, and plasma power of 100 W. When the remote hydrogen plasma pretreatment was employed, catalytic active points were observed on the surface of the pre-deposited 500-A thick TiN substrate. These active points reduced the incubation time required for the copper nucleation on the pre-deposited TiN substrate. Enhanced copper nucleation rates were observed on the hydrogen plasma pretreated TiN substrate owing to the high concentration of the reactive hydrogen species in the reaction zone, thereby enhancing the reduction reaction and leading to improved copper qualities and increased nucleation rates. The resistivity measurements of the films yielded film resistivities in the range of approximately 2.1±0.1 μΩ cm for most samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Metal and Thin Film Mechanics · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.