article·2000-12-01

The effects of pre-aging and concentration of surface modifying agent on the microstructure and dielectric properties of SiO2 xerogel film

Jung Ho Kim, Sang-Bae Jung, Hyung‐Ho Park, Sang-Hoon Hyun

Publisher page

Abstract

Abstract Surface modification is a key process for the preparation of porous SiO 2 xerogel film by ambient pressure drying. The microstructure and surface terminal bonds which determine the properties of the film are closely related with the surface modification. Two kinds of pre-aged film were prepared to investigate the effect of wet-gel microstructure on the surface modification of film. The concentration of surface modifying agent (tetramethylchlorosilane; TMCS) in solvent ( n -hexane) was also varied. As concentration of TMCS increased, surface morphology was obtained from a two-dimensional structure to a three-dimensional network structure with pre-aged film for 1 h at 70°C. This is due to the increase in methyl groups as surface terminal bonds and the suppression of condensation reaction. Variation in film thickness, porosity, dielectric constants, and I – E characteristic according to the TMCS concentration in n -hexane modifying solution was explained in the view-point of the nature of wet-gel structure. However, because of the additional increase in the strength of network and the effective exchange of surface terminal –OH groups with –OSi(CH 3 ) 3 groups even with low concentration of TMCS, there were no serious changes in the properties of SiO 2 xerogel film pre-aged for 12 h at 70°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerogels and thermal insulation · Silicone and Siloxane Chemistry · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.