Phase constitution and element distribution in Cu-In-S based absorber layers grown by the CISCuT-process
Source abstract
Abstract
Abstract Solar cells based on CISCuT grown Cu-In-S absorber layers obtained efficiencies of about 6% in small areas. The CISCuT process for Cu-In-S absorber layer preparation starts from an metallurgical grade Cu tape. On this tape a thin In layer is electrochemically deposited in a continuous roll to roll process. The following sulphurisation step - also in a continuous roll to roll process - is characterised by a short reaction time of a few seconds and a relatively high process temperature of about 600°C under normal pressure in N 2 atmosphere. Special conditions in the sulphurisation process lead to a well defined layer sequence of different Cu-In-S phases inside the grown layer. X-ray diffraction (XRD) based quantitative phase analysis of KCN etched CISCuT absorber layers shows the phases CuInS 2 , CuIn 5 S 8 and Cu/In δ -phase. The measurements correspond to transmission electronic microscopy (TEM) and energy dispersive analysis of X-rays (EDX) determined phase constitutions and sublayer thickness. Additional investigations with RAMAN-spectroscopy as well as secondary ion mass spectrometry (SIMS) and secondary neutrals mass spectrometry (SNMS) give a consistent idea of the layer sequences and the impurity distribution inside the film system. As far as we know we describe here, for the first time, such an absorber structure possibly with advantages for further solar cell developments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.