article·2002-03-01

Inner wall modification of a poly(ethylene terephthalate) (PET) capillary by 13.56 MHz capacitively coupled microplasma

Hiroyuki Yoshiki, Akio Oki, Hiroki Ogawa, Yasuhiro Horiike

Publisher page

Abstract

A new capacitively coupled microplasma (CCMP) operated at atmospheric pressure is presented. Using a conventional excitation frequency of 13.56 MHz, a stable micro-glow discharge was generated in a capillary, whose cross-section is 65 ∼500×500∼5000 μm 2 , on a 20×20 mm 2 dielectric chip. To attain plasma generation at a low RF power with no reflected power, a π-type matching circuit was miniaturized and suitably designed to satisfy the electric resonance condition with the excitation frequency, so that an atmospheric He discharge was generated at an incident power of 1∼3 W. He atomic excitation temperature was evaluated to be 2000∼2100 K at atmospheric pressure at 5 W by a Boltzmann plot. Atmospheric Ar glow discharge was also attained at 9 W in a quartz capillary with a cross-section of 65 X 2800 μm 2 . The microplasma was applied to inner wall modification of a poly(ethylene terephthalate) (PET) capillary with a cross-section of 500×500 μm 2 to demonstrate the electro-osmosis flow (EOF) control on the micro-capillary electrophoresis (CE) chips. We found that the mobility of the EOF (μ EOF ) of the PET capillary treated by the plasma of He/O 2 (3%) mixture was 4.8×10 -4 (cm 2 /Vs), which is approximately three times as large as that of the untreated PET capillary.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microfluidic and Capillary Electrophoresis Applications · Electrohydrodynamics and Fluid Dynamics · Microfluidic and Bio-sensing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.