Improvement of mechanical properties according to phase transformation of Cu coating layer functionalized with high energy beam
Source abstract
Abstract
Abstract After the Cu coating layer was fabricated, the high energy beam was irradiated and the mechanical properties of the Cu coating layer before and after irradiation were compared. As the high energy beam is irradiated onto the material of the coating layer, the dipole of the polar material rotates, and the coating layer is heated due to the intermolecular friction, thereby resulting in a heat treatment effect even in a short time. Scanning electron microscopy analysis confirmed that the surface structure was changed, and X-ray diffraction and X-ray photoelectron spectroscopy were used to confirm the crystallinity and bonding state from Cu to CuO. In addition, in the nanoindentation analysis, all improved mechanical properties were observed for martens hardness, indentation hardness and indentation modulus. It is clear that this method will be widely used in various fields in the near future to change the surface layer phase to improve mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Fabrication of microporous thin films from polyelectrolyte multilayers10.1021/la000075g ↗
2. Carbon nanotube thin films: fabrication, properties, and applications10.1021/cr9002962 ↗
3. Fabrication and characterization of Cu2ZnSnS4 thin films deposited by spray pyrolysis technique10.1016/j.tsf.2006.12.144 ↗
4. Titanium, zirconium, and hafnium tetrahydroborates as tailored CVD precursors for metal diboride thin films10.1021/ja00213a058 ↗
5. Comparison of the structure of PVD-thin films deposited with different deposition energies10.1016/S0257-8972(96)03041-1 ↗
6. Industrial applications of CrN (PVD) coatings, deposited at high and low temperatures10.1016/S0257-8972(97)00393-9 ↗
7. Synthesis and In Vivo Pharmacokinetic Evaluation of Degradable Shell Cross-Linked Polymer Nanoparticles with Poly(carboxybetaine) versus Poly(ethylene glycol) Surface-Grafted Coatings
8. Semiconductor laser crystallization of a-Si: H on conducting tin-oxide-coated glass for solar cell and display applications10.1007/s00339-003-2352-9 ↗
9. High tunability in compositionally graded epitaxial barium strontium titanate thin films by pulsed-laser deposition10.1063/1.1569427 ↗
10. Optical polymer thin films with isotropic and anisotropic nano-corrugated surface topologies10.1038/35071039 ↗
11. Hydrophilic properties of nano-TiO2 thin films deposited by RF magnetron sputtering10.1016/j.vacuum.2006.09.001 ↗
12. Preparation of CuAlO2 nanocrystalline transparent thin films with high conductivity10.1088/0957-4484/14/5/310 ↗
13. Determination of binding energy and solubility parameters for functionalized gold nanoparticles by molecular dynamics simulation10.1021/la2005024 ↗
14. Electron relaxation dynamics in semicontinuous metal films on nanoparticle surfaces10.1016/S0009-2614(02)00240-3 ↗
15. Grafting of dendritic polyethers onto nanometre silica surface10.1039/b107032k ↗
16. Functionalized graphene–BaTiO 3/ferroelectric polymer nanodielectric composites with high permittivity, low dielectric loss, and low percolation threshold10.1039/c3ta10460e ↗
17. Detection beyond the Debye screening length in a high-frequency nanoelectronic biosensor10.1021/nl203666a ↗
18. High-frequency, magnetic-field-responsive drug release from magnetic nanoparticle/organic hybrid based on hyperthermic effect10.1021/am100237p ↗
19. Current trends in biomaterial surface functionalization—nitrogen-containing plasma assisted processes with enhanced selectivity10.1016/S0042-207X(02)00766-2 ↗
20. Cell treatment and surface functionalization using a miniature atmospheric pressure glow discharge plasma torch10.1088/0022-3727/39/16/S08 ↗
21. Selective surface functionalization of polyolefins by plasma treatment followed by chemical reduction10.1016/S0257-8972(99)00232-7 ↗
22. Surface functionalization of nanostructured silver-coated polyester fabric by magnetron sputtering10.1016/j.surfcoat.2010.04.042 ↗
23. Titanium oxide thin films deposited by high-power impulse magnetron sputtering10.1016/j.tsf.2006.07.089 ↗
24. Modification of proton conducting membrane for reducing methanol crossover in a direct-methanol fuel cell10.1016/S0378-7753(00)00602-9 ↗
25. AFM nanoindentations of diatom biosilica surfaces10.1021/la062666y ↗
26. Influence of ion bombardment on the surface functionalization of plasma deposited coatings10.1016/j.surfcoat.2009.05.028 ↗
27. Immobilization of DNA-Au nanoparticles on aminosilane-functionalized aluminum nitride epitaxial films for surface acoustic wave sensing10.1063/1.3003875 ↗
28. Electrical Energy Storage in Ferroelectric Polymer Nanocomposites Containing Surface-Functionalized BaTiO3 Nanoparticles10.1021/cm8021648 ↗
29. Relationships between residual stress, microstructure and mechanical properties of electron beam–physical vapor deposition thermal barrier coatings10.1016/S0257-8972(98)00668-9 ↗
30. Mechanical properties of robust ultrathin silk fibroin films10.1002/adfm.200601136 ↗
31. Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays10.1016/j.tsf.2004.01.052 ↗
32. Nanoindentation stress–strain curves as a method for thin-film complete mechanical characterization: application to nanometric CrN/Cr multilayer coatings10.1007/s00339-002-1669-0 ↗
33. Modeling of nanoindentation of bulk and thin film by finite element method10.1016/j.wear.2004.05.021 ↗
34. Effects of the substrate on the determination of thin film mechanical properties by nanoindentation10.1016/S1359-6454(01)00328-7 ↗
35. International Organization for Standardization, Metallic materials, Instrumented indentation test for hardness and other materials parameters - Part 1 (ISO standard No 14577-1:2003).
36. Characterization of nonwoven material functionalized by sputter coating of copper10.1016/j.surfcoat.2007.09.022 ↗
37. A combinatorial study on the influence of Cu addition, film thickness and heat treatment on phase composition, texture and mechanical properties of Ti–Ni shape memory alloy thin films10.1016/j.tsf.2009.07.130 ↗
38. Reduced conductivity in the terahertz skin-depth layer of metals10.1063/1.2716066 ↗
39. Investigation of terahertz Sommerfeld wave propagation along conical metal wire, J10.1364/JOSAB.26.000A23 ↗
40. Experimental and theoretical investigation of the electronic structure of Cu2O and CuO thin films on Cu(110) using x-ray photoelectron and absorption spectroscopy, J