article·2016-07-06

Investigation of the electrochemical property of solid oxide fuel cells with sputtered yttria-stabilized zirconia electrolyte

Tai‐Nan Lin, Maw-Chwain Lee, Ruey‐Yi Lee, Yaw-Hua Shiu, Wei‐Xin Kao, Yang-Chuang Chang, Chun-Hsiu Wang

Publisher page

Abstract

Abstract Yttria-stabilized zirconia (YSZ) is the most commonly used electrolyte material for solid oxide fuel cells. The use of relatively inexpensive metal components would require a trade-off in the lowering of the operating temperature below 800 °C. However, the reduced temperature results in an increased resistivity of YSZ. This can be overcome by reducing the electrolyte thickness using thin film techniques. In this study, the preparation of a thin film of YSZ via the sputter deposition technique was reported. YSZ electrolyte films were deposited on anode substrates at 650/750 °C. The gas permeability test indicated a gas-tight electrolyte with a gas leak rate − 7 lcm − 2 s − 1 . The measured open circuit voltage was 1.1 V, while the maximum power density was 515 mW cm − 2 .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.