journal article·2019-12

Preparation and characterization of copper zinc tin sulfide-selenide thin films using a single target RF sputtering method

S.A. Hegazy, H. Abou-Gabal, M.B. Soliman, M.H. Hassan

Thin Solid Films· Volume 692
Publisher page

Abstract

Abstract Copper zinc tin sulfide-selenide (CZTSSe) thin films have been prepared from a single alloyed CZTSSe target using one-step RF plasma magnetron sputtering technique. The films morphology, stoichiometry and crystalline properties have been examined as a function of the target to substrate distance, the deposition power and the substrate type. It was found that; within the range of the investigated target to substrate distance; better film crystallization was achieved when this distance equals to the target diameter, namely 5 cm in this work. An appropriate film thickness of 1.1 μm along with a more adequate compositional ratio equals to 14% Cu, 14% Zn, 16% Sn and 56% (S+Se) were obtained at low deposition power of 30 W with gradually decreasing the power during the deposition process. In this case, the low deposition rate resulted in proper compositional ratio, but the film crystallinity was found to be affected by the substrate type. As such, it was found that the use of a crystalline silicon substrate instead of the amorphous Soda Lime Glass substrate enhanced the film crystallinity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Aberle, thin-film solar cells10.1016/j.tsf.2009.03.056 ↗
2. Thin-Film solar cells: an overview10.1002/pip.541 ↗
3. CZTS nanocrystals: a promising approach for next generation thin film photovoltaics10.1039/c3ee41627e ↗
4. A high efficiency electrodeposited Cu2ZnSnS4 solar cell10.1002/aenm.201100526 ↗
5. The state and future prospects of kesterite photovoltaics10.1039/c3ee41781f ↗
6. Device characteristics of CZTSSe thin‐film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
7. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS–Se solar cells10.1039/C5EE02153G ↗
8. Thin film solar cell with 8 4% power conversion efficiency using an earth abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
9. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
10. Synthesis and characterization of Cu2ZnSnS4 thin films grown by PLD: solar cells10.1016/j.jallcom.2011.04.074 ↗
11. Studies of compositional dependent CZTS thin film solar cells by pulsed laser deposition technique: an attempt to improve the efficiency10.1016/j.jallcom.2012.07.108 ↗
12. Earth‐abundant element photovoltaics directly from soluble precursors with high yield using a non‐toxic solvent10.1002/aenm.201100140 ↗
13. A simple solution-based route to high-efficiency CZTSSe thin-film solar cells
14. Ito · 1989 · 341
15. Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique10.1143/APEX.1.041201 ↗
16. Growth and characterization of Cu2ZnSnS4 thin films by dc reactive magnetron sputtering for photovoltaic applications10.1149/1.3481764 ↗
17. Controlled substitution of S by Se in reactively sputtered CZTSSe thin films for solar cells10.1016/j.jallcom.2015.06.276 ↗
18. 10% Efficiency Cu2ZnSn(S, Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗
19. Influence of precursor uniformity on the performance of Cu2ZnSnSxSe4 – x thin film solar cells prepared by the sputtering method10.1016/j.tsf.2017.07.054 ↗
20. Chao GaO, 8.1% efficient Cu2Zn(Sn,Ge)(S,Se)4 solar cell based on a single-target sputtering method10.1016/j.jallcom.2017.12.040 ↗
21. Nanoscale charge transport and local surface potential distribution to probe defect passivation in Ag doped Cu2ZnSnS4 absorbing layer10.1088/1361-6528/aaf185 ↗
22. Enhanced photoresponse of Cu2ZnSn(S, Se)4 based photodetector in visible range10.1016/j.jallcom.2016.09.299 ↗
23. Effect of naf evaporation on morphological and structural properties of Cu2ZnSnSe4 (CZTSe) thin film deposited by sputtering from a single compound target10.1016/j.jallcom.2017.05.098 ↗
24. Wasa · 2004
25. Nanoscale investigation of grain growth in RF-Sputtered indium tin oxide thin films by scanning probe microscopy10.1007/s11664-014-3212-4 ↗
26. Origin of high carrier mobility and low residual stress in RF superimposed DC sputtered Al doped ZnO thin film for next generation flexible devices10.1016/j.apsusc.2017.11.274 ↗
27. Effect of sputtering process parameters on film properties of molybdenum back contact10.1016/j.solmat.2011.11.038 ↗
28. Development of thin film solar cell based on Cu 2 ZnSnS 4 thin films10.1016/S0927-0248(00)00088-X ↗
29. L.E. Alexander, X-ray diffraction procedures for polycrystalline and amorphous materials: publisher not identified, 1974.
30. Structure and electrical properties of Mo back contact for Cu (In, Ga) Se 2 solar cells10.1016/j.vacuum.2012.04.036 ↗