article·2009-02-08

Characterization and Cu electroless plating of laser-drilled through-wafer via-holes in GaN/Al2O3

Jaehui Ahn, Hong-Yeol Kim, Hyo-Chol Koo, Hyo-Chol Koo, Jae Jeong Kim, Jae Jeong Kim, Jihyun Kim, Jihyun Kim

Publisher page

Abstract

Abstract GaN on Al2O3 was drilled with a high power Nd:YAG laser. Micro-Raman spectroscopy showed that the induced damage was nominal at about 15 µm from the edge of the drilled through-wafer via-holes. Cu plating was accomplished using an electroless plating technique. FIB was employed to expose the interface between electrolessly plated Cu and GaN on the sidewall of the drilled holes, followed by SEM/EDX to confirm that the sidewall of the drilled holes was successfully covered with Cu. Cu electroless plating after laser drilling has the potential to simplify device layout and improve device integration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: GaN-based semiconductor devices and materials · Semiconductor materials and interfaces · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.