Properties of atomic-vapor and atomic-layer deposited Sr, Ti, and Nb doped Ta2O5 Metal–Insulator–Metal capacitors
Source abstract
Abstract
Abstract Atomic Vapor Deposition and Atomic Layer Deposition techniques were applied for the depositions of Ta 2 O 5 , Ti–Ta–O, Sr–Ta–O and Nb–Ta–O oxide films for Metal–Insulator–Metal (MIM) capacitors used in back-end of line for Radio Frequency applications. Structural and electrical properties were studied. Films, deposited on the TiN bottom electrodes, in the temperature range of 225–400 °C, were amorphous, whereas the post deposition annealing at 600 °C resulted in the crystallization of Nb–Ta–O films. Electrical properties of MIM structures, investigated after sputtering Au top electrodes, revealed that the main characteristics were different for each oxide. On one hand, Ti–Ta–O based MIM capacitors possessed the highest dielectric constant (50), but the leakages currents were also the highest (~ 10 − 5 A/cm 2 at − 2 V). On the other hand, Sr–Ta–O showed the lowest leakage current densities (~ 10 − 9 A/cm 2 at − 2 V) as well as the smallest capacitance–voltage nonlinearity coefficients (40 ppm/V 2 ), but the dielectric constant was the smallest (20). The highest nonlinearity coefficients (290 ppm/V 2 ) were observed for Nb–Ta–O based MIM capacitors, although relatively high dielectric constant (40) and low leakage currents (~ 10 − 7 A/cm 2 at − 2 V) were measured. Temperature dependent leakage-voltage measurements revealed that only Sr–Ta–O showed no dependence of leakage current as a function of the measurement temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Ferroelectric and Negative Capacitance Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.