article·2003-04-01

Monte Carlo simulations on large-area deposition of amorphous silicon by hot-wire CVD

Andrea Pflüger, Bernd Schröder, Hans‐Jörg Bart

Publisher page

Abstract

Abstract Scale-up of hot-wire CVD reactors for commercial production of a-Si:H based solar cells requires understanding of the large-area deposition process. Therefore, the process was simulated using the Direct Simulation Monte Carlo-method (G.A. Bird, Clarendon Press, Oxford (1994)), considering reactions at the filaments, in the gas phase and at the substrate, and in particular large-area deposition by modeling the gas shower and the filament grid, which were found to determine the uniformity and quality of the a-Si:H films (Thin Solid Films 395 (2001) 61; Solar Energy Mater. Solar Cells 73 (2002) 321). The distance between the filament grid and the substrate ( d fil–S ) and the distance between the filaments ( d fil ) were systematically varied, and the simulation results were compared to experimental results obtained in our large-area deposition system (Thin Solid Films 395 (2001) 61; Solar Energy Mater. Solar Cells 73 (2002) 321). The experimentally obtained optimum filament-to-substrate distance was supported by an optima in the simulated Si 2 H 4 -concentration. For other species, the existence was confirmed but a definite value for optimum d fil–S could not be concluded. The simulations also confirmed the influence of the filament geometry on the uniformity as obtained in the experiments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.