article·2004-08-31

Electrical properties of an epitaxial Si film prepared by RF magnetron plasma at low temperature

Toshifumi Yuji, Youl-Moon Sung

Publisher page

Abstract

Abstract This article reports the formation of epitaxial Si film that were formed by directly depositing a Sb-doped n-type epilayer on a p-type substrate by using a DC bais RF magnetron sputter system at a low temperature of 400 °C and a conventional vacuum of 5×10 −7 Torr. In addition, the plasma parameters were quantitatively investigated to examine the deposition condition. The electron density ( n e ) of about 10 17 m −3 was obtained at the plasma region under the conditions where gas pressure was 3 mTorr, the power of the RF source was 350 W and the electron temperature ( T e ) and ion saturation current ( I 0 ) were in the range of 3–4 eV and 1–1.5 mA/cm 2 , respectively. The p–n junction diode fabricated by the Si epitaxy shows, under optimum conditions, a reverse current density (RCD) as low as 9.5×10 −6 mA/cm 2 at a reverse bias voltage of 5 V and an ideality factor of 1.05. The reverse current density has a good correlation with the crystallinity of the deposited films, which, in turn, depends on deposition gas pressures and substrate biases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Semiconductor materials and interfaces · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.