article·2007-06-27

Interfacial characteristics and dielectric properties of Ba0.65Sr0.35TiO3 thin films

Zuci Quan, Baishun Zhang, Tianjin Zhang, Xingzhong Zhao, Ruikun Pan, Zhijun Ma, Juan Jiang

Publisher page

Abstract

Ba0.65Sr0.35TiO3 (BST) thin films were deposited on Pt/Ti/SiO2/Si substrates by radio frequency magnetron sputtering technique. X-ray photoelectron spectroscopy (XPS) depth profiling data show that each element component of the BST film possesses a uniform distribution from the outermost surface to subsurface, but obvious Ti-rich is present to BST/Pt interface because Ti4+ cations are partially reduced to form amorphous oxides such as TiOx (x < 2). Based on the measurement of XPS valence band spectrum, an energy band diagram in the vicinity of BST/Pt interface is proposed. Dielectric property measurements at 1 MHz reveal that dielectric constant and loss tangent are 323 and 0.0095 with no bias, while 260 and 0.0284 with direct current bias of 25 V; furthermore, tunability and figure of merit are calculated to be 19.51% and 20.54, respectively. The leakage current density through the BST film is about 8.96 × 10− 7 A/cm2 at 1.23 V and lower than 5.66 × 10− 6 A/cm2 at 2.05 V as well as breakdown strength is above 3.01 × 105 V/cm.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Semiconductor materials and devices · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.