Preparation of strontium titanate thin films by mirror-confinement-type electron cyclotron resonance plasma sputtering
Source abstract
Abstract
Abstract Using mirror-confinement-type electron cyclotron resonance (ECR) plasma sputtering method, strontium titanate (SrTiO 3 ) thin films have been prepared on Si and Pt/Ti/SiO 2 /Si substrates at a low substrate temperature (below 450 K) in a low pressure (2.7×10 −2 Pa) environment of pure Ar and Ar/O 2 mixture. Prepared film surfaces were very smooth regardless of high deposition rate (∼8.5 nm/min). The composition ratio Sr/Ti of Sr to Ti in the films varied with the distance between the target and the substrate. All as-deposited films on Si substrates were found to be amorphous and were crystallized by post-deposition annealing using an electric furnace at 650 K, i.e. approximately 250 K lower than annealing for films obtained by conventional RF magnetron sputtering. Post-deposition annealing of these films using millimeter-wave radiation decreased the crystallization temperature to a value of 550 K. Furthermore, all as-deposited films on Pt/Ti/SiO 2 /Si substrates by a plasma of Ar and O 2 gas mixture were found to be crystallized regardless of no substrate heating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Semiconductor materials and devices · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.