article·2002-08-01

The effect of ion beam bombardment on the properties of Ta(C)N films deposited from pentakis-diethylamido-tantalum

Soo‐Hyun Kim, Se-Joon Im, Ki‐Bum Kim

Publisher page

Abstract

Abstract TaN or TaCN films were deposited using a single source, pentakis-diethylamido-tantalum as diffusion barrier for copper metallization. N- and Ar-ion beams with energy of 120 eV were used for bombarding the film during growth to improve the film quality. The films deposited using N-ion beam showed a resistivity of approximately 950 μΩ cm and a density of 7.65 g/cm 3 . The use of the N-ion beam, however, drastically degraded the step coverage of the film (∼5% at the 0.5 μm contact holes with aspect ratio of 3:1). On the other hand, the films deposited using an Ar-ion beam showed a resistivity of approximately 600 μΩ cm and a density of 8.26 g/cm 3 . The step coverage measured at the same contact was approximately 40%. The resistivity and density of the thermally-decomposed film were also measured for comparison and were found to be approximately 10 000 μΩ cm and 5.85 g/cm 3 , respectively. Finally, the diffusion barrier performance of 50 nm thick films against Cu was investigated by X-ray diffractometry. The Cu/N- or Ar-ion beam bombarded film/Si structures showed formation of η″-Cu 3 Si after annealing at 650 °C for 1 h, while Cu/thermally-decomposed film/Si showed this only after annealing at 600 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Metal and Thin Film Mechanics · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.