article·2015-03-01

Etching characteristics of hydrogenated amorphous silicon and poly crystalline silicon by hydrogen hyperthermal neutral beam

Seung Pyo Hong, Jongsik Kim, Jong‐Bae Park, Kyoung Suk Oh, Young‐Woo Kim, Suk Jae Yoo, Dae Chul Kim

Publisher page

Abstract

Abstract A hydrogen hyperthermal neutral beam (HNB) generated by an inclined slot-excited antenna electron cyclotron resonance plasma source has been used to etch hydrogenated amorphous silicon (a-Si:H) and polycrystalline silicon (poly-Si) films. In this work, we present selective etching of a-Si:H with respect to poly-Si by hydrogen plasma and hydrogen HNB under various substrate temperatures, gas pressures, and bias voltages of the neutralizer. We have observed that the etch rate of a-Si:H is considerably higher than that of poly-Si. The etch rate is largely dependent upon the substrate temperature. In this experiment, the optimal substrate temperature for improving the etch rate is approximately at 150 °C. The root mean square surface roughness of the etched material reaches a maximum at 150 °C and decreases rapidly. The etch rate of poly-Si is not sensitive to changes in the experimental condition, such as the substrate temperatures and gas pressures. However, as the hydrogen HNB energy is increased, the etch rate of poly-Si also increases gradually. The hydrogen HNB energy contributes in improving the etch rate of a-Si:H and poly-Si films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.