journal article·2017-02

Thick tungsten layer coating on ferritic-martensitic steel without interlayer using a DC vacuum plasma spray and a RF low pressure plasma spray method

Ho Seok Kim, Bong Guen Hong, Se Youn Moon

Thin Solid Films· Volume 623
Publisher page

Abstract

Abstract Tungsten has been attracted as one of promising candidates for plasma-facing materials in a next fusion reactor because of its many advantages. However, since the tungsten is difficult to machine and requires high cost techniques for joining to various substrates, alternative methods such as plasma spray coating have been developed. In this work, therefore, we coated thick tungsten layer on a ferritic-martensitic steel by a 60 kW radio-frequency low pressure plasma spray system and a 55 kW direct-current vacuum plasma spray system. Thick tungsten coating over 2 mm using both systems without any interlayer was obtained by inserting a substrate preheating process. We also discussed the characteristics of coated tungsten layers such as hardness, micro-structure, porosity, surface morphology, and crystal structure which were investigated using Vickers hardness tester, field emission scanning electron microscopy, microscope, 3-dimensional surface measuring system, and X-ray diffraction, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Plasma facing and high heat flux materials-needs for ITER and beyond10.1016/S0022-3115(02)01175-3 ↗
2. In-vessel tritium retention and removal in ITER10.1016/S0022-3115(98)00876-9 ↗
3. Development of tungsten coating for fusion applications10.1016/S0920-3796(01)00350-7 ↗
4. Review of recent works in development and evaluation of high-Z plasma facing materials10.1016/S0022-3115(98)00817-4 ↗
5. Development of tungsten armor and bonding to copper for plasma-interactive components10.1016/S0022-3115(98)00358-4 ↗
6. ASDEX upgrade team, materials for the plasma-facing components of fusion reactors10.1016/j.jnucmat.2004.04.005 ↗
7. Dimension precision of metal injection molded pure tungsten10.1016/j.ijrmhm.2008.10.003 ↗
8. Characterization of thick plasma spray tungsten coating on ferritic/martensitic steel F82H for high heat flux armor10.1016/j.jnucmat.2008.12.219 ↗
9. Characterization of plasma-sprayed tungsten coating on graphite with intermediate layers10.1016/j.surfcoat.2012.08.051 ↗
10. Development of coating by thermal plasma spraying under very low-pressure condition <1mbar10.1016/j.vacuum.2004.08.013 ↗
11. Davis · 2004
12. Recent advances on hydrogen retention in ITER's plasma-facing materials: beryllium, carbon, and tungsten10.13182/FST54-891 ↗
13. The structure analysis of the EAST updated Divertor10.1007/s10894-014-9696-3 ↗
14. Manufacturing and testing of W/Cu mono-block small scale mock-up for EAST by HIP and HRP technologies
15. Ferritic/martensitic steels – overview of recent results10.1016/S0022-3115(02)01082-6 ↗
16. Fabrication and integrity test preparation of HIP-joined W and ferritic-martensitic steel mockups for fusion reactor development10.3938/jkps.65.1290 ↗
17. Modification of vacuum plasma sprayed tungsten coating on reduced activation ferritic/martensitic steels by friction stir processing10.1016/j.fusengdes.2015.04.059 ↗
18. Particle melting, flattening and stacking behaviors in induction plasma deposition of tungsten
19. Phase and microstructure of tungsten coating on C/C composite prepared by double-glow plasma10.1016/j.fusengdes.2008.07.033 ↗
20. Mechanical properties of hard W-C physically vapor deposited coating in monolayer and multilayer configuration10.1016/S0040-6090(96)09177-8 ↗