The structural and electrical properties of Zn–Sn–O buffer layers and their effect on CdTe solar cell performance
Source abstract
Abstract
Thin films of zinc-tin-oxide (ZTO) have been deposited on SnO 2 :F coated glass substrates by co-sputtering of SnO 2 and ZnO. The deposition conditions for ZTO were controlled in order to vary film stoichiometry. The electro-optical and structural properties of ZTO have been studied as a function of their stoichiometric ratio and post-deposition annealing conditions. The same films were subsequently utilized as part of a bi-layer transparent front contact for the fabrication of CdTe solar cells: glass/SnO 2 :F/ZTO. The performance of these devices suggested that the ZTO deposition and cell processing conditions can be optimized for enhanced device performance in particular for devices with thin CdS. Specifically, high blue spectral response (>70% at 450 nm), accompanied by high open-circuit voltages (830 mV), and fill factors (70 + %) have been demonstrated. Best solar cell performance was obtained for multi-phase ZTO films deposited at substrate temperatures of 400°C and a Zn/Sn ratio of 2.0, and which contained the binary phase of ZnO 2 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (5)
Show source-provided references
1. Wu · 2001 · 531
2. Wu · J. Appl. Phys. · 2001 · 89 · 456410.1063/1.1351539 ↗
3. Ferekides · Thin Solid Films · 2000 · 361-362 · 52010.1016/S0040-6090(99)00824-X ↗
4. Moriga · J. Vac. Sci. Technol. A · 2004 · 22 · 170510.1116/1.1765658 ↗
5. Mamazza · 2005 · 283