article·2002-12-01

Microstructure of BaxSr1−xTiO3 thin films grown on sapphire substrates

David Rafaja, J. Kub, Daniel Šimek, J. Lindner, J. Petzelt

Publisher page

Abstract

Abstract High degree of ordering was observed in the SrTiO 3 , Ba 0.1 Sr 0.9 TiO 3 and BaTiO 3 thin films grown by injection metal-organic chemical vapour deposition on sapphire substrates. Orientation of the Al 2 O 3 substrates was (0 0 1) perpendicular to the surface; orientation of the films was (1 1 1). Atomic ordering at the interface between the substrates and the films approached locally heteroepitaxial growth. Two distinct in-plane orientations of the films were observed. The projection of the [1 0 0] direction in the cubic or cubic-like films was rotated either +30 or −30° with respect to the [1 0 0] crystallographic direction of the substrate. Still, a slight disorientation of the films from the dominant directions was observed. The in-plane disorientation of the films increased with increasing barium contents. In SrTiO 3 , the in-plane disorientation of crystallites was 1.5°, in BaTiO 3 3.2°. The residual stress analysis has shown that the films grew without residual stress at the deposition temperature (800 °C). Consequently, the interface layer between films and substrates was very strained but able to pass the in-plane orientation of the substrate to the film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Electronic and Structural Properties of Oxides · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.