article·2003-04-01

Microcrystalline silicon for solar cells deposited at high rates by hot-wire CVD

E. Iwaniczko, Yueqin Xu, R.E.I. Schropp, A. H. Mahan

Publisher page

Abstract

Abstract Using two tungsten (W) filaments and a filament–substrate spacing of 3.2 cm, we have explored the deposition of microcrystalline silicon (μc-Si) solar cells, with the i-layer deposited at high deposition rates ( R d ), by the hot-wire CVD (HWCVD) technique. These cells were deposited in the n–i–p configuration on textured stainless steel (SS) substrates, and all layers were deposited by HWCVD. Thin, highly crystalline seed layers were used to facilitate crystallite formation at the n–i interface. Companion devices were also fabricated on flat SS substrates, enabling structural measurements (by XRD) to be performed on i-layers used in actual device structures. Using a filament temperature of 1750 °C, device performance was explored as a function of i-layer deposition conditions, including variations in i-layer substrate temperature ( T sub ) using constant H 2 dilution, and also variations in H 2 dilution during i-layer deposition. The intent of the latter is to affect crystallinity at the top surface of the i-layer (i–p interface). We report device performance resulting from these studies, with all i-layers deposited at R d >5 A/s, and correlate them with i-layer structural studies. The highest device efficiency reported is 6.57%, which is a record efficiency for an all-hot-wire solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.