Preparation of Al-doped ZnO thin films by RF thermal plasma evaporation
Source abstract
Abstract
Abstract In this study, Al-doped ZnO films were prepared by RF thermal plasma evaporation, and the influence of the O 2 flow rate and Zn concentration in the raw solution on film growth was investigated. The surface roughness of the films was improved under a lower O 2 flow rate. The electrical resisitivity also decreased with decreasing O 2 flow rate, and the minimum resistivity of 9×10 −4 Ω cm was obtained at an O 2 flow rate of 30 ml/min, which corresponds to a ratio of 0.069% of total gas flow rate. The deposition rate increased proportionally with increasing Zn concentration in the raw solution. The film prepared at the maximum Zn concentration of 100 g/l exhibited a deposition rate of 110 nm/min and the electrical resistivity of 2.2×10 −3 Ω cm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.