Temperature dependence of FePt thin film growth on MgO(100)
Source abstract
Abstract
FePt films have been prepared by pulsed laser deposition onto MgO(001) substrates at room temperature and at high temperatures of 700 and 800 °C. Epitaxial growth is observed down to room temperature, which has not been reported before and which is explained by the high energy deposition process. Chemical ordering, on the other hand, occurs only at higher temperatures. The c-axis of the L10 phase is perpendicular to the substrate for the highest deposition temperature of 800 °C and both in-plane/out-of-plane for the partially ordered films deposited at lower temperatures. It is shown that the out-of-plane orientation of the c-axis is favored and a state of complete out-of-plane ordering can be reached during annealing if the film is granular after deposition. In this case, the magnetic properties are comparable to films deposited at high temperature, with coercivities above 5 T. If the film is continuous, however, the pure perpendicular c-axis texture is suppressed due to accumulation of compressive stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic properties of thin films · Magnetic Properties and Applications · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.