Characteristics of SiOx thin films deposited by atmospheric pressure chemical vapor deposition as a function of HMDS/O2 flow rate
Source abstract
Abstract
Abstract SiO 2 -like thin films were deposited using a modified dielectric barrier discharge with a gas mixture of hexamethyldisilazane (HMDS)/O 2 /He/Ar and their film characteristics were investigated as functions of the HMDS and O 2 flow rates. As the HMDS flow rate was increased, higher amounts of Si–(CH 3 ) x bonds and lower amounts of Si–OH bonds were observed in the deposited SiO x , due to the increase in the amount of the less dissociated HMDS, which also caused an increase of the surface roughness. The addition and increase of the oxygen flow to HMDS/He/Ar brought the stoichiometry of SiO x close to SiO 2 and decreased the surface roughness by decreasing the amount of Si–(CH 3 ) x bonds through the increased decomposition and oxidation of HMDS, even though the deposition rate was decreased. However, when the O 2 flow rate was higher than a certain threshold, the surface roughness increased again, possibly due to the decrease in the extent of HMDS dissociation caused by the decreased plasma density at the higher oxygen flow rate. By using an optimized gas mixture of HMDS (150 sccm)/O 2 (14 slm)/He (5 slm)/Ar (3 slm), SiO 2 -like thin films with a very low impurity level and having a smooth surface could be obtained with a deposition rate of approximately 42.7 nm/min.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Plasma Applications and Diagnostics · Surface Modification and Superhydrophobicity · Plasma Diagnostics and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.