Thermal annealing effect on nitrogen-doped TiO2 thin films grown by high power impulse magnetron sputtering plasma power source
Source abstract
Abstract
Abstract The work reports plasma assisted growth of nitrogen-doped titanium dioxide (N-TiO 2 ) thin films using high power impulse magnetron sputtering (HiPIMS) power source and effect of post-deposition thermal annealing. The films were deposited at low pressure. The binding energies of elements of interest, the energy gap, crystallinity and morphology of the films were analyzed before and after annealing. The results showed an increase in binding energies, a fact attributed to enhanced oxidation, after the annealing process. Only nitrogen doped samples grown by HiPIMS exhibited the presence of substitutional nitrogen. The energy gap of the films was found to decrease after doping and annealing. Improvement in crystallinity with a small shift in the crystalline peaks indicating decrease in lattice parameter, which could be seen by surface smoothing, was observed after thermal annealing. As a result of the growth of films by HiPIMS, nitrogen doping and post-deposition thermal annealing, improvements in the properties of the films which have relevance for photocatalytic and energy applications were observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. The surface science of titanium dioxide10.1016/S0167-5729(02)00100-0 ↗
2. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
3. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
4. Nanostructured thin films based on TiO2 and/or SiC for use in photoelectrochemical cells: a review of the material characteristics, synthesis and recent applications10.1016/j.mssp.2014.05.053 ↗
5. Titanium dioxide photocatalysis10.1016/S1389-5567(00)00002-2 ↗
6. TiO2 photocatalysts and diamond electrodes10.1016/S0013-4686(00)00620-4 ↗
7. Enhanced dielectric constant and suppressed dielectric loss of ternary composites based on Ag-P (VDF-HFP) matrix and TiO2 nanowires10.1016/j.ceramint.2016.05.031 ↗
8. Monolithic DSSC/CIGS tandem solar cell fabricated by a solution process10.1038/srep08970 ↗
9. Visible-light photocatalysis in nitrogen-doped titanium oxides10.1126/science.1061051 ↗
10. Ti3+ in the surface of titanium dioxide: Generation, properties and photocatalytic application
11. Development of dye-sensitized solar cells with sputtered N-doped TiO2 thin films: from modeling the growth mechanism of the films to fabrication of the solar cells
12. Role of oxygen vacancy in the plasma-treated TiO2 photocatalyst with visible light activity for NO removal10.1016/S1381-1169(00)00362-9 ↗
13. Structure, composition and evolution of dispersive optical constants of sputtered TiO2 thin films: effects of nitrogen doping10.1088/0022-3727/41/4/045304 ↗
14. Nitrogen-concentration dependence on photocatalytic activity of TiO2-xNx powders10.1021/jp030133h ↗
15. The preparation of TiO2–nitrogen doped by calcination of TiO2·xH2O under ammonia atmosphere for visible light photocatalysis10.1016/j.solmat.2004.11.001 ↗
16. Effect of nitrogen doping on TiOxNy thin film formation at reactive high-power pulsed magnetron sputtering10.1088/0022-3727/43/28/285203 ↗
17. Secondary ion mass spectrometry and X-ray photoelectron spectroscopy studies on TiO2 and nitrogen doped TiO2 thin films10.1016/j.ssc.2010.11.017 ↗
18. Smith · 1995
19. Magnetron sputtering of TiOxNy films10.1016/j.vacuum.2006.04.004 ↗
20. Heavily nitrogen-doped titanium oxide thin films by reactive sputtering and excimer laser annealing10.1111/j.1551-2916.2010.04012.x ↗
21. Effects of annealing temperature on the photocatalytic activity of N-doped TiO2 thin films10.1016/j.ceramint.2011.05.160 ↗
22. Effect of temperature on the growth of TiO2 thin films synthesized by spray pyrolysis: structural, compositional and optical properties10.1016/j.materresbull.2011.06.043 ↗
23. Fundamental absorption edge in the semiconductor CdInGaS4 at high temperatures10.1088/0022-3727/18/4/019 ↗
24. X-ray photoelectron spectroscopic studies of anodically synthesized self aligned TiO2 nanotube arrays and the effect of electrochemical parameters on tube morphology10.1016/j.matchemphys.2011.12.041 ↗
25. Electronic structure of anatase TiO2 oxide10.1063/1.356190 ↗
26. Formulation for XPS spectral change of oxides by ion bombardment as a function of sputtering time10.1016/j.susc.2004.03.002 ↗
27. Progress in quantitative surface analysis by X-ray photoelectron spectroscopy: current status and perspectives10.1016/j.elspec.2009.05.004 ↗
28. Sensitivity factors for XPS analysis of surface atoms10.1016/0368-2048(83)85087-7 ↗
29. Study of effect annealing temperature on the structure, morphology and photocatalytic activity of Si doped TiO2 thin films deposited by electron beam evaporation10.1016/j.apsusc.2011.07.085 ↗
30. Photoelectron spectroscopic investigation of nitrogen-doped titania nanoparticles10.1021/jp0469160 ↗
31. Titanium nitride oxidation chemistry: An x-ray photoelectron spectroscopy study10.1063/1.351465 ↗
32. Physico-chemical processes and kinetics of sunlight-induced hydrophobic - superhydrophilic switching of transparent N-doped TiO2 thin films10.1021/am400785x ↗
33. XPS analysis of adsorption of oxygen molecules on the surface of Ti and TiNx films in vacuum10.1016/0368-2048(92)80016-2 ↗
34. Reactive ionized physical vapor deposition of thin films10.1051/epjap/2011110199 ↗
35. Sticking probabilities of Cu, Zn, Sn, and S atoms in magnetron sputtering plasmas employing a Cu2ZnSnS4 stoichiometric target10.1016/j.vacuum.2015.07.019 ↗
36. Quantification of the incorporation coefficient of a reactive gas on a metallic film during magnetron sputtering: the method and results10.1016/j.tsf.2009.07.190 ↗
37. Dependence of the sticking coefficient of sputtered atoms on the target–substrate distance10.1088/0022-3727/41/15/152005 ↗
38. Dynamic behaviour of the reactive sputtering process10.1016/j.tsf.2005.12.250 ↗
39. Relation between oxygen concentration in AlN lattice and thermal conductivity of AlN ceramics sintered with various sintering additives10.2109/jcersj2.119.291 ↗
40. Influence of nitrogen dopants on N-doped TiO2 electrodes and their applications in dye-sensitized solar cells10.1016/j.electacta.2011.02.091 ↗
41. Influence of annealing temperature on the structural, mechanical and wetting property of TiO2 films deposited by RF magnetron sputtering10.1016/j.tsf.2010.07.036 ↗
42. D.D. Irala, H.S. Maciel, D. A. Duarte, M. Massi, A.S. Da Silva Sobrinho, M. Pavanello, C. Claeys, J. Martino, Influence of the nitrogen concentration on the photoinduced hydrophilicity of N-doped titanium dioxide thin films deposited by plasma sputtering, (2010) 109–115. doi:10.1149/1.3474148.10.1149/1.3474148 ↗
43. Studies of surface wettability conversion on TiO2 single-crystal surfaces10.1021/jp983386x ↗
44. Wetting properties of polycrystalline TiO2 surfaces: a scaling approach to the roughness factors10.1021/la101975e ↗
45. Optimisation of HiPIMS photocatalytic titania coatings for low temperature deposition10.1016/j.surfcoat.2014.02.020 ↗
46. High power pulsed magnetron sputtering: A review on scientific and engineering state of the art10.1016/j.surfcoat.2009.11.013 ↗
47. Efficient hydrogen production by photocatalytic water-splitting using Pt-doped TiO2 hollow spheres under visible light10.1016/j.ceramint.2016.01.047 ↗