article·2005-10-24

Formation and characterization of Ti–Si–N–O barrier films

Y. C. Ee, Zhong Chen, S. B. Law, Shiping Xu

Publisher page

Abstract

Abstract Ti–Si–N–O barrier films are successfully formed by RF reactive magnetron sputtering of Ti target with different SiH 4 gas flow rate. Si/Ti ratio in the formed film is found to increase with increasing SiH 4 gas flow rate. The film resistivity ranges from 3.63 × 10 3 μΩ cm to 6.45 × 10 6 μΩ cm due to microstructure variation. X-ray diffraction (XRD) of these films reveals the formation of crystalline titanium nitrides, silicon nitrides and titanium silicide compounds. XPS further unveils that titanium oxide, silicon oxide, and silicon oxynitride compounds are present; however, these non-crystalline compounds are not detectable by XRD. High-resolution transmission electron microscopy (HRTEM) confirms that the film consists of Ti–N, Si–N, and Ti–Si nanocrystals embedded in amorphous matrix. This type of microstructure gives rise to very high stability against copper diffusion under bias temperature stressing (BTS) at 200 °C and 0.5 MV/cm. Furthermore, this process delivers a very smooth film with surface roughness (RMS) between 2.2 and 3.3 nm. Field emission secondary electron microscopy (FESEM) shows a surface morphology of Ti–Si–N–O films with particles size less than 100 nm. By controlling the process parameters, we are able to control the properties of Ti–Si–N–O films as the diffusion property is behaved differently.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.