article·2005-08-20

Microcrystalline B-doped window layers prepared near amorphous to microcrystalline transition by HWCVD and its application in amorphous silicon solar cells

P. Kumar, M. Kupich, D. Grunsky, B. Schröeder

Publisher page

Abstract

Abstract The electronic and structural properties of p-type microcrystalline silicon films prepared near the microcrystalline to amorphous (μc-amorphous) transition by hot-wire chemical vapor deposition are studied. Silane is used as a source gas while H 2 as diluent and trimethylboron (TMB) and boron trifluoride (BF 3 ) as doping gases. Increasing TMB concentration from 0.01% to 5% favors the amorphous growth whereas for BF 3 the crystalline fraction remains constant. The dark conductivity ( σ d ) of μc-Si:H p-layers remains approximately constant for TMB = 1–5% at constant crystalline fraction X c . This dark conductivity behavior is attributed to the decrease in doping efficiency with increasing TMB concentration. The best initial efficiency obtained for a 400 nm amorphous pin solar cell with optimized μc-Si:H p-layer is 7.7% ( V oc = 874 mV, J sc = 12.91 mA/cm 2 , FF = 68%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.