Formation of thin β-FeSi2 template layer for the epitaxial growth of thick film on Si (111) substrate
Source abstract
Abstract
For the epitaxial growth of thick β-FeSi2 films, we fabricated ultrathin β-FeSi2 template layers (thinner than 20 nm) on Si (111) substrates with different methods. Surface morphology and crystallinity of the template layers were found to be dependent on the surface conditions of the substrate and the fabrication method. It was revealed that to form a smooth and continuous template, a hydrogen-terminated surface was better than that covered with a several-nanometer oxide layer. Using this surface, continuous (110)/(101)-oriented epitaxial template was obtained by depositing 6-nm iron at 400 °C and subsequent in situ annealing at 600 °C in MBE chamber, namely, a reaction deposition epitaxy (RDE) method. Co-deposition of iron and silicon with atomic ratio of Fe/Si=1/2 allowed the forming of template layers at further low temperature. Co-deposited template layers exhibited better crystallinity and morphology than those prepared by RDE. By using the optimized template layer, we succeeded in growing high-quality thick β-FeSi2 films on Si (111) substrates with sharp β-FeSi2/Si interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Semiconductor materials and devices · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.