article·2009-09-27

Can micro-compression testing provide stress–strain data for thin films?

Gerhard Dehm, H.P. Wörgötter, Sophie Cazottes, J.M. Purswani, Daniel Gall, Christian Mitterer, Daniel Kiener

Publisher page

Abstract

Micro-compression testing using an instrumented micro- or nanoindenter equipped with a flat punch is a promising approach to measure the stress–strain response of miniaturized materials and to complement hardness and modulus measurements gained by nanoindendation. Focussed ion beam milling is employed to fabricate micron-sized compression pillars from 1 µm thick single crystal Cu(001), TiN(001), and VN(001) films grown on MgO(001), and from a 6.7 µm thick polycrystalline W coating deposited on Si(001). In situ micro-compression tests in a scanning electron microscope reveal reproducible stress–strain curves for W, a considerable statistical scatter in the flow stress for Cu and VN, and failure of TiN pillars by cleavage. A linear work-hardening rate of 2.7 ± 1.2 GPa is determined for the polycrystalline W coating. The results are critically discussed taking into account material defects and the stiffness of the film-substrate system.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and mechanical properties · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.