Effect of substrate temperatures on evaporated In2S3 thin film buffer layers for Cu(In,Ga)Se2 solar cells
Source abstract
Abstract
Abstract For the realization of vacuum in-line process in the fabrication of Cu(In,Ga)Se 2 (CIGS) solar cells, In 2 S 3 thin film buffer layers for CIGS have been deposited on glasses and CIGS layers with a thickness of about 650 A by thermal evaporation process. During the thermal evaporation, the temperature of the substrate was varied from room temperature to 500 °C by heating and the grown In 2 S 3 films were investigated and analyzed in terms of the optimized buffer layer for CIGS solar cells. From the results of scanning electron microscope and X-ray diffraction, the In 2 S 3 thin film deposited at a higher substrate temperature showed the larger grain size and the films have amorphous structural characteristics. Although the structural characteristics such as the atomic ratio of In to S and transmittance of the In 2 S 3 thin films were not proportional to temperature, it was possible to obtain the large optical band gap of In 2 S 3 films of about 3.8–3.9 eV enough to be used as the buffer layer of CIGS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.