CVD of CuGaSe2 for thin film solar cells employing two binary sources
Source abstract
Abstract
Abstract A novel halogen supported chemical vapor phase technique in an open tube system has been employed for the deposition of the polycrystalline thin film CuGaSe2 (CGS). Cu2Se and Ga2Se3 powders served as the source materials and were shown to volatilize stoichiometrically using I2/H2 and HCl/H2, respectively. Different Cu(g)/Ga(g) ratios in the gas phase — in the 1/100 to 1/3 range — were studied to determine phase behavior during deposition onto plain and Mo-coated glass substrates at Tsub=500°C. For single phase CGS material, X-ray diffraction measurements revealed a decrease in the c/a-ratio from 1.963 to 1.957 with increasing Cu-content. In addition, AAS and EDX analysis showed a correlation between Cu(g)/Ga(g) and film stoichiometry allowing for the deposition of films with varying Cu/Ga-ratios. Mo/CuGaSe2/CdS/ZnO devices fabricated from CGS deposited at Cu(g)/Ga(g)=1/10 resulted in Voc values of up to 853 mV (AM 1.5) which compares favorably to the best values reached for this absorber material so far.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.