Advantages of highly ionized pulse plasma magnetron sputtering (HIPIMS) of silver for improved E. coli inactivation
Source abstract
Abstract
This study addresses the DC-magnetron sputtering (DCMS) of Ag-films on polyester and compares the results found for the E. coli inactivation with the inactivation obtained when applying highly ionized pulse plasma power magnetron sputtering (HIPIMS). The amounts of Ag needed to inactivate E. coli by HIPIMS sputtering were an order of magnitude lower than with DCMS indicating a significant saving of noble metal and concomitantly a faster E. coil inactivation was observed compared to samples sputtered with DCMS. Higher current densities applied with DCMS led to shorter E. coil inactivation times and this trend was observed also for HIPIMS sputtered samples. By DCMS the thicker layers needed to inactivate E. coil comprised slightly larger Ag-aggregates compared to the thinner Ag-layers sputtered by HIPIMS to inactivate E. coil within short times. Longer sputtering times by DCMS and HIPIMS lead to optically darker Ag-deposits reaching the absorption edge of silver absorption of similar to 1000 nm. Mass spectroscopic analyses indicated that HIPIMS produced a much higher amount of Ag1+ and Ag2+ compared to DCMS due to the higher peak discharge current employed in the former case. (C) 2011 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and Waste Management Techniques · ZnO doping and properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.