article·2004-01-13

Aluminium-induced crystallisation of amorphous silicon: influence of the aluminium layer on the process

J. Klein, Jens Schneider, M. Muske, S. Gall, W. Fuhs

Publisher page

Abstract

Abstract Thin polycrystalline silicon (poly-Si) layers can be formed by aluminium-induced crystallisation of amorphous silicon (a-Si). During annealing the initial glass/Al/a-Si layer structure is transformed into a glass/poly-Si/Al+Si structure. For the overall process the structure of the Al layer is very important. In this paper the effect of oxygen present during deposition of the Al-layer on process time and grain size is discussed. It was found that low oxygen flows ( f O 2 =1 sccm) during Al depositions cause a significant reduction in process time. However, the grain size of the resulting poly-Si films is not affected. Further increase of f O 2 does not result in further acceleration of the process. Instead of that the layer exchange becomes more and more incomplete and the resulting poly-Si films are discontinuous. Because of the considerable reduction in process time for samples with Al-layers deposited at f O 2 =1 sccm the annealing temperature could be lowered from 500 to 460 °C in order to obtain larger grains. The process was still completed within 90 min.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.