The characteristics of interface misfit dislocations for epitaxial α-Fe2O3 on α-Al2O3(0001)
Source abstract
Abstract
Abstract α-Fe2O3(0001) films of thickness equal to ∼7 nm and ∼70 nm were epitaxially grown on α-Al2O3(0001) by oxygen plasma-assisted molecular beam epitaxy. The interfaces were characterized using high resolution transmission electron microscopy, electron energy-loss spectroscopy, and X-ray diffraction. The interface exhibited coherent regions separated by equally-spaced misfit dislocations. When imaged from the [2110] direction, the dislocation spacing is 7.0±1.1 nm for the 70-nm-thick specimen, and 7.2±0.1 nm for the 7-nm-thick specimen. When imaged from the [0110] direction, the dislocation spacing is 4.5±0.1 nm for the 7-nm-thick specimen. The experimentally observed dislocation spacings are approximately consistent with those calculated from the lattice mismatch between α-Al2O3 and α-Fe2O3, implying that the lattice mismatch is accommodated mainly by interface misfit dislocations above the critical thickness, which is less than 7 nm. This conclusion is also corroborated by the measured residual strain of ∼0.5% determined from X-ray diffraction for the 70 nm film. Electron-energy-loss-spectroscopy analysis reveals that the Fe L2,3-edge shows no measurable chemical shift relative to the L2,3-edge of structural Fe+3, indicating complete oxidation of Fe in the as-grown film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electron and X-Ray Spectroscopy Techniques · Iron oxide chemistry and applications · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.