Effect of substrate bias on AlN thin film preparation in shielded reactive vacuum arc deposition
Source abstract
Abstract
Abstract Aluminum nitride (AlN) thin films were prepared using reactive cathodic vacuum arc deposition in conjunction with a macrodroplet shield plate. Various bias conditions, such as no bias (floating), 0-V bias (same potential as anode), DC bias of −10 to −30 V, and RF power of 25–200 W, were applied to the substrate table. For floating bias, a -axis-oriented film was obtained. For 0-V bias, the films prepared on molybdenum substrate showed no preferential orientation, although the film prepared on silicon and borosilicate glass showed a -axis-orientation. For RF bias, the orientation changed from the a - to the c -axis as the RF power increased. The hardest (27 GPa) film was obtained for 0-V bias, and the hardness of the other films ranged from 19 to 24 GPa. The refractive index of the film prepared on quartz substrate was approximately 2.0 over the visual and infrared regions for all films. The extinction coefficient was less than 0.01 over the visual and infrared regions, with the exception of the film prepared under the 0-V bias condition, which showed a higher value.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Metal and Thin Film Mechanics · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.