Ultraviolet and visible Raman studies of nitrogenated tetrahedral amorphous carbon films
Source abstract
Abstract
Nitrogenated, tetrahedral amorphous carbon (ta-C) films prepared by the filtered cathodic vacuum arc (FCVA) technique have been studied using ultraviolet (UV, 244 nm) and visible (514 nm) micro-Raman scattering. The nitrogen ions were produced by a RF ion-beam source with a nitrogen flow-rate varying from 0 to 10.0 sccm, which results in a nitrogen content from 0 to 10.8 at.% in the deposited films. In the visible Raman spectra, only vibrational modes of sp 2 -bonded carbon (G and D peaks) are observed, while a new wide peak, called the T peak, located at 1090‐1320 cm 21 , associated with the vibrational mode of sp 3 -bonded carbon, appears in the UV-Raman spectra. In the visible Raman spectra, the G-peak width (100‐113 cm 21 ) and the intensity ratio ID/IG (0.34‐0.94) are both sensitive to the structural changes induced by N incorporation. In the UV-Raman spectra, the G-peak position almost linearly decreases from 1665 to 1610 cm 21 , and the Tpeak position increases tremendously from 1095 to 1314 cm 21 with increasing N content. The G-peak position and width, and the T-peak position, are all sensitive to the bonding structure of the films. q 2000 Elsevier Science S.A. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.